MikroTik Advanced Quiz 4
Select your answers and check your results. Use Reset to start again.
Search
Practice Pronunciation (Merriam-Webster)
Navigation
Cisco Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Cisco Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Cisco Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Juniper Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Juniper Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Juniper Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Huawei Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Huawei Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Huawei Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Nokia Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Nokia Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Nokia Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
MikroTik Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
MikroTik Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
MikroTik Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
TP-Link Beginner Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
TP-Link Intermediate Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
TP-Link Advanced Quizzes
Quiz 1,
Quiz 2,
Quiz 3,
Quiz 4,
Quiz 5
Advanced Quiz 4
1. What is the primary reason to implement a BGP Route Reflector?
To encrypt the BGP packets
To increase the physical range of the fiber connection
To eliminate the need for a 'Full Mesh' iBGP topology
To act as a DHCP server for BGP peers
2. In OSPF, what is an 'NSSA' (Not-So-Stubby Area)?
A stub area that allows the redistribution of external routes via Type 7 LSAs
An area that does not support any routing
The OSPF backbone area (Area 0)
An area used only for wireless connections
3. Which parameter must match on both sides for an L2TP/IPsec tunnel to establish successfully?
The router's serial number
The IPsec Pre-Shared Key (PSK)
The DNS server of the ISP
The LCD screen brightness
4. What does the term 'L2MTU' refer to in MikroTik hardware?
The maximum speed of the CPU
The amount of RAM available for Layer 2
The login timeout for the web interface
The maximum frame size that the hardware chip can handle without fragmentation
5. When configuring BGP, what does 'Nexthop Choice: Force Self' do?
It reboots the router
It tells iBGP peers to use the advertising router's own IP as the next hop
It forces the router to use its own DNS settings
It disables the next hop check entirely
6. Which BGP attribute is used to influence incoming traffic by making a path appear longer?
Local Preference
Weight
AS-Path Prepending
Router ID
7. In the Mangle table, which action is used to direct traffic to a specific routing table?
mark-routing
mark-connection
mark-packet
accept
8. What is the default 'Hold Time' for a BGP session in MikroTik RouterOS?
30 seconds
180 seconds
1 hour
5 minutes
9. Which feature allows a MikroTik router to support 'Jumbo Frames'?
Wireless N mode
Power over Ethernet
DNS Forwarding
Increasing the MTU and L2MTU settings on the interface
10. In OSPF, what is the role of the 'Backbone Area'?
It acts as the central hub (Area 0) through which all other areas must connect
It is the only area that allows wireless traffic
It stores the admin password
It is used for local bridging only
Previous
Check Quiz
Reset
Next
Other
Timer
00:00
Start
Stop
Reset
Vocabulary Quiz
Score: 0
Reset Score
Submit Answer
Next Word
Spin the Wheel
SPIN
Promo's
Explore More
Cisco Certifications
Cisco Learning Network